Description
ARDEX FEATHER FINISH®
ARDEX FEATHER FINISH® is an underlayment formulated from a blend of Portland cement and other hydraulic cements that
provides a smooth, permanent finish for a variety of substrates prior to the installation of today’s demanding floor coverings,
including sheet vinyl and VCT (vinyl composition tile).
ARDEX FEATHER FINISH allows the installation of most types of floor covering in as little as 15 minutes over all types of interior concrete, masonry, wood, terrazzo, and ceramic and quarry tile – as well as properly prepared residues of cutback and other non-water-soluble adhesives on concrete – all without the need for priming or the use of a latex additive.
Key Features
- Self-drying, finish underlayment
- Provides a smooth surface prior to the installation of floor covering over a variety of substrates
- Exceptional bond strength
- Easy to mix and apply
- Mixes with water only
- True feather edge
- Superior coverage – up to 300 sq. ft. per bag*
- Mold and mildew resistant
- Install floor coverings in as little as 15 minutes
- Interior use only
Mixing Ratio: 2 1/2 quarts (2.4 L) of water per 10 lb. (4.5 kg) bag
For smaller batches, use 2 parts powder to 1 part water by volume
*Coverage: 16.7 sq. ft. per bag at 1/4” (1.5 sq. m at 6 mm)
33.3 sq. ft. per bag at 1/8” (3.09 sq. m at 3 mm)
100-300 sq. ft. (9.2-27.8 sq. m) per bag at a skim coat
*Coverage will vary depending on the texture of the surface being smoothed.
Install Flooring: 15-20 minutes at 70°F (21°C)
