Schluter®-KERDI-FIX
Schluter®-KERDI-FIX is a single-component sealing and bonding compound with a silane-modified polymer base. It is odor-neutral, UV- and weather-resistant, and contains no solvents. KERDI-FIX is elastomeric and bonds well to most materials, such as wood, stone, concrete, metal, glass, and many plastics.
Related Products
Bona R850T® Adhesive 20 oz.
• Perfect alternative to face nailing close-out rows, board replacements and trim applications
• Excellent initial “green grab” means the flooring stays in place
• Rapid shear strength development – Flooring is ready for furniture and foot traffic in one day
• Easy to clean – Will not harm the finish on pre-finished trim and floors; will not stain hands
AcrylPro® Professional Tile Adhesive
- For standard wall and floor tile installations
- Just spread and set
- Ideal for small format tile
- Sets porcelain, ceramic and stone
Silk™ Patching & Finishing Compound
- Quick-setting formula permits floor covering installation in as little as 30 – 90 minutes
- Smooths the finishes on interior subfloors
- Patches and levels concrete and plywood from feather edge to 1″ (25mm)
- No additives required
Schluter®-KERDI-BOARD-SN 12″x 20″ Shower Niche
Keep everything in the shower neatly organized with a prefabricated shower niche that is fully sealed, quick
to install, and integrates with KERDI and KERDI-BOARD shower assemblies.
• Waterproof and ready to tile
• Finish off the shower niche with a trim profile of your choice
• Larger sizes include a prefabricated, adjustable shelf
Ultrabond ECO® 975 Urethane Hardwood Adhesive
• 100%-solids formulation; moisture-cured and with no solvent added
• Low-odor formula with negligible volatile organic compound (VOC) content
• Easy to trowel with excellent trowel-ridge holdout for proper adhesive bonding
MBP Multi-Surface Bonding Primer 1 gallon
MBP
Multi-Surface Bonding Primer
- Ready-to-use. No dilution or additives required
- For use on non-porous porous surfaces. Versatile primer for virtually any job
- Unsurpassed adhesion to difficult substrates. Delivers ultimate bonding strength
- One-coat application. Goes on fast and cures quickly
Schluter®-KERDI-BOARD-ZS/-ZT
Schluter®-KERDI-BOARD-ZT are galvanized steel washers used to fasten KERDI-BOARD to metal or wood stud framing. They feature tabs that penetrate the surface of the KERDI-BOARD and temporarily hold the washers in place to enable quick installation of the corresponding screws.
KERDI-BOARD-ZS are coarse thread screws used to fasten KERDI-BOARD to wood stud framing with the corresponding
Ultrabond ECO® 360 Vinyl Adhesive 4 gals.(15.1 L)
- Premium High-Performance Adhesive for Solid Vinyl Sheet, Tile and Plank
- Excellent indentation and shrinkage resistance
- Plasticizer migration resistant for use with all solid vinyl flooring
- Easy trowelability for quick installation
